YiHi SX600H Chipset · Quick User Guide

#Company news ·2025-10-28 15:08:51

(Designed for device makers and DIY lovers, delivering top-tier performance and customization to everyday users.)

Large Screen=0.91''OLED=SX600HL

Small Screen=0.69''OLED=SX600HS

Highlights

• Accurate constant power output (±0.5%), adjustable 1W–60W
• Supports Power, Voltage, and Temperature Control modes
• Ultra-precise resistance detection down to 0.0001Ω
• Single lithium battery input, supports external charging board (5V/1.5–1.8A)
• Multiple protections: reverse polarity, short circuit, low resistance, overheat, low voltage
• Firmware upgrade support for personalized features
• Designed for global high-end players and DIY modders, combining power with customization

Power & Charging

• Power supply: Single lithium battery (max 4.2V)
• External charging: Supports 5V/1.5–1.8A module

Working Parameters

• Standard resistance: 0.10–3.0Ω (Power mode); 0.05–3.0Ω (Temp mode)
• Static current: <1µA
• Vaping current: Max 20A at 0.15Ω
• Output: 1–60W, max 8V

Features

• Display: battery voltage, output voltage, resistance, power
• Protection: reverse, low voltage, overheat, short circuit, low resistance
• Screen: 0.69-inch OLED, 96×16 resolution
• Temp range: 100–300℃ (212–572℉)
• Flavor curves: customizable Power & Temp curves (20 steps)
• Firmware upgrade via PC via SXi-tools
• 180° screen flip (remove atomizer, hold fire button until “check atomizer,” then press + button)

Operation

• Power ON/OFF: Press fire button 5 times quickly to turn on/off
• Menu & Modes: Press fire button 5 times → use +/– buttons to navigate → confirm with fire button

• Modes: WATTS, V.VOL, TEMP

• TEMP mode: choose coil type (SS316L / NI200 / TCR), support resistance setting & TCR customization (0.00050–0.00700)
  • Power mode: adjust directly with +/– buttons (1–60W)
  • Temp mode: press + button to adjust wattage, – button to adjust temperature (100–300℃)
  • Voltage mode: adjust 1.0–8.0V with +/– buttons (limited by 60W max output)
  • Protection prompts:

• LOW Ω (short or resistance <0.1Ω)

• LOW BATTERY (voltage <3.2V)

• TOO HOT (overheat protection)
  • System lock/unlock: press fire button 3 times quickly
  • Adjustment lock: hold +/– buttons for 2s
  • Flavor setting: preset curves (SOFT, HARD, NEUTR, etc.) or customizable EQ curves
  • Standby & Sleep: screen off after 30s idle, sleep mode activated, wake with fire button